Archive for the ‘Traffic’ Category
-
Converting French Traffic – The Niche Paysites That Work
In our last article we took a look at a three (3) month period of international traffic stats and, what niches worked on German adult traffic. In this article we will do the same again except we will be analyzing what niche paysites worked best on French porn surfers.
French Traffic – Quick Analysis.
It would seem that for many of the surfers we managed to grab and filter from France that their primary interest was in Teen and the Amateur niches although, that said, we did get a few conversion on some fetish paysites, specifically fetish sites that had ‘watersports’ and ‘BDSM’ featured on the paysites tour pages.French Adult Traffic – The Niches.
As with the German traffic we targeted in the previous article we also filtered our French adult traffic to some niche specific hub sites as well as some general hub sites to better judge which niches converted the best on French surfers the results we experienced are as follows.Teen.
Our conversions on French teen sites were not as good as what they were for German surfers however, that said, they were good non the less. With a ratio of around 1:192 over the three month period we analyzed the French adult surfers we managed to get to our sponsors sites worked well for us.Amateur.
With our amateur conversions the one thing we noticed was that tours that featured teens as the main focus were the ones which converted consistently, with this in mind, we did change a couple of the Amateur tours we used to see how that would affect sales towards the end of the 3 month period and, sales did drop slightly, this would backup the statements in the Teen niche made above in that, French surfers are looking primarily for Teen orientated paysites.Asian.
The two Asian niche paysites we used didn’t have many sales overall however, we did notice that the little traffic that we sent to them converted well, as above, Asian niche sites that featured teens were again the better converters on the French traffic we received.Ebony.
I think it is worth mentioning the ebony niche, especially when you take into account we sent less than 100 hits to French ebony paysites and, managed to get 2 sales from those hits. Unfortunately, we did not anticipate the amount of traffic that wouldn’t choose the ebony niche so we have no solid figures that are worth mentioning here or, any explanation behind how we made the sales.Fetish.
Our French fetish traffic seemed to like the more niche specific type of tours, making us sales on Watersports, BDSM and even general fetish paysites that said, the figures we achieved with the fetish pay sites we used were disappointing as we had thought this would be the ideal niche for the French markets.Gay.
The sales we achieved with our gay French traffic were reasonable overall, the surfers chose to signup to gay sites that featured ‘twink’ like models on the tours again, this would lend favor to the fact that overall French surfers seem to be interested in the younger generation to get their kicks.French Traffic – The Results.
Overall we were happy with the majority of the results we received on our French adult traffic with the exception of a few bad choices on our part trying to concentrate on the Fetish side of the industry. We certainly learnt that it would appear French adult surfers are looking for Teen orientated sites over the other niches.Article written by Lee
-
Converting Chinese Adult Traffic – The Niche Paysites That Work
Converting Chinese Adult Traffic – The Niche Paysites That Work.
To date we have looked at most of the types of country specific traffic available to webmasters every day and, more importantly, which niches they convert on. In this article we will finish up our look at the foreign traffic and how profitable it can be with the final main country on the net – China.Chinese Adult Surfers – Quick Analysis.
As with Japanese traffic, most webmasters seem to think that Chinese speaking adult surfers are pretty worthless when it comes to buying porn memberships and this is true – If you do not know what niches to offer your Chinese surfers that said, we found some interesting results given the three (3) month test we had on our Chinese traffic and, the results we observed might just make you change your mind about sending the Chinese surfers you get to your sites off to traffic trades.Chinese Porn Surfers – The Niches.
Because we knew relatively little about the Chinese traffic we had on our sites we decided that, rather send it to a specific language hub site we would send it to our main hub page and, allow the Chinese surfers to filter themselves through to the sites that interested them on their own, to our surprise, only 40% of the traffic we knew was Chinese chose to filter itself to a Chinese specific language hub site, the remainder, choosing to go through our main English hub site.Fetish.
Across all of the niches we offered the surfers, the Fetish niche was the one that converted most consistently month after month and, more than converted, actually retained members once they had signed up to the paysites.Gay.
Unlike the traffic we had that was Japanese a lot of the Chinese traffic that hit our site decided to visit the Gay niche paysites we had to offer them and, there was less than 10% difference between the Fetish and Gay signups we observed month after month. Quite a difference when compared to surfers from Japan and, a pleasant one at that.Amateur.
Specifically teen amateur niche sites or, at least sites that had amateur looking teen modes on the tours also did well on our Chinese traffic however, the conversion ratios for the recurring programs didn’t do as well as what we had expected with most memberships being cancelled within 2 months. Non the less, the Chinese surfers did join and most of them re-billed in excess of 1 month before leaving the site.Teen.
As mentioned above, it would appear that Chinese porn surfers are looking for teen niches again though, the teen paysites we used featured amateur looking teens prominently on the pages so whether this was a choice on the surfers part to join the teen sites or, because we only offered amateur looking teen paysites isn’t known.Asian.
Unlike Japanese surfers, Chinese surfers also joined the Asian niches that were offered up to them and, surprisingly enough, we noticed more signups to English Asian sites than localized Chinese pay sites.Chinese Adult Surfers – The Results.
Overall we were very impressed with how the Chinese traffic we had flowing through our sites both acted and, converted on the sites that we offered them to join, especially since the Japanese traffic we had didn’t seem to like the gay niche sites yet Chinese traffic worked wonderfully on exactly the same gay niche pay sites.Across the board I think a revisit of Chinese traffic is needed with more options on our part when it comes to the teen and amateur niches especially just to see if the results we experienced thus far were unique or, are truly indicative of how the Chinese surfer navigates and joins pay sites.
Article written by Lee
-
Traffic Brokers – Buying Additional Traffic
For many adult webmasters traffic is the one thing they can get and, good converting traffic it would seem is hard to find in bulk. For those webmasters who simply can not or, will not work towards getting a good converting traffic base you now have several options. These option come in the form of the Adult Traffic Brokers that have seemingly multiplied over the last 12 months.
Traffic Brokering – The Basics.
So what is traffic brokering? In layman’s terms, it is the process used when one company sells / buys their traffic to / from another in order to turn the traffic they are selling / buying into a profit. Often webmasters will purchase traffic from a broker for several reasons, the main one being that they simply could not have generated the same amount of traffic they have purchased by any other means.Traffic Brokering – The Costs.
The costs for purchasing brokered traffic vary greatly from traffic broker to traffic broker however, as a rough guideline, you could spend anywhere between US$1 and US$3 for each thousand (1000) unique hits that the traffic broker sends you. The cost of this traffic however can change for many reasons as do the rules for where you can actually send the purchased traffic to.Brokered Traffic – The Uses.
There are many uses for brokered traffic as those webmasters who do it on a consistent basis will tell you. However, by far the most popular method of using purchased traffic would seem to be sending it to a central ‘hub’ site or a gallery page. From this point on the traffic can start to filter itself even more.In addition to this, some webmasters choose to send their brokered traffic directly to their sponsors pay sites if they have purchased niche specific brokered traffic.
All of the above methods have their pro’s and con’s involved however, for most webmasters, the fact that they have purchased traffic at a relatively low cost will mean they can turn a profit. That said, purchasing traffic from a broker does not guarantee you a profit on your investment.
Traffic Brokering – Overview.
In overview of this article i would say that for webmasters who are unable to gain mass traffic through conventional methods, the traffic brokers offer a service of value and, whether the traffic that you are buying is profitable to you is an outcome that no one can say until the traffic has been used. one thing to consider though when purchasing traffic is that you need to have a clear, concise plan of what your needs for the traffic are, do not just send it blindly into the proverbial unknown but build up a solid plan of what you ultimately want to achieve.Also, before buying traffic ‘en mass’ you should always spend a few dollars in the first instance to run a small test of the traffic, this way, you will be able to send thousands of hits to your sponsors or hubs and judge for yourself which broker will offer you the best traffic for your money.
Article written by Lee.
-
Building A Surfer Trap – Stage 8 – Final Stage
Ok people we have hit the final stage in our surfer trap, Stage 8.
All we are really going to do in this stage is a brief recap over what we have done so far along with checking that our trap is working properly.
In order for us to check our trap is working properly we need to upload it to our server if we haven’t already done so, therefore, you should do this now.
Once the surfer trap has been uploaded we now need to go to the first page, the Multi-Site FPA.
Depending on how you set up your Multi-Site FPA you should either get a pop up or not.
You should also have a counter AND a banner exchange code loading at the bottom of the page below your ‘no thanks’ link.
If this works how you want it to then this stage is working ok.
The next thing we need to check is that ALL of the links off this Multi-Site FPA are working so expect to get a lot of pop-ups while we check this.
You should click on each of the Single-Site FPA’s in turn ensuring that for every one you have a pop-up console appear.
In addition to checking the Single-Site FPA links you should now click on the ‘no thanks’ link along with the counter code and the banner exchange code on your Multi-Site and Single-Site FPA’s.
If these all load fine then this stage of the checking is complete.
Next, we need to close down any and all of the FPA’s we may have open including the Multi-Site FPA.
You should now be left with a couple of consoles, again, follow the links on your consoles including any to the counter you chose along with any banner exchange code you utilized on your consoles.
Again if these work how you expected them to, this section of the checking process is now complete.
For the next step, you need to log into your counter AND banner exchange account, you want to make sure that you have gained additional impressions and rankings from your banner and counter impressions and clicks.
Be aware however, that some counters and banner exchanges will not count multiple views and click from the same IP address so you may only show one or two additional clicks, impressions, or rankings. This is perfectly normal.
If your accounts have gained additional ranks, impressions, and clicks then this stage is completed.
Close down your consoles, you should now get the blur consoles that you created (if you used them) again, as before, check that all of the links from this consoles work.
If they do then you now have a fully complete Surfer Trap to use.
So, what next? Well there are a couple of options, you can mirror this surfer trap to experiment with your sponsors different tour pages, link your first mirror to the second tour page, your third to console free tour pages, etc.
Another good thing that you can do is to create additional Multi-Site FPA’s however, this time, create them by niche so where we have a general Multi-Site FPA at the moment you could use this same method for a Gay, Asian, Teen, etc Multi-Site FPA using the same methods we did when we created this trap.
You should always sign up for a new counter and banner exchange code for each variation of your surfer trap. This way, you get to see performance based on a new working model enabling you to decide which version of the trap works best for you.
I hope this tutorial has given you some insight into how we can generate, filter and trade traffic whilst marketing our sites effectively and, that it has given you some ideas on how you can implement even the simplest item provided to you by your sponsor to generate sales.
For those of you who have been following this tutorial I would like to thank you and wish you all the best with your new found marketing skills.
If you have any questions as always, feel free to post on the forums and we will endeavor to help you out.
Article written by Lee.
-
Building A Surfer Trap – Stage 7
Here we go with Stage 7 in this Surfer Trap tutorial.
We should by now have a rather complex looking surfer trap, pop up consoles and blur consoles on all of the pages within it, all of these same pages interlinking each other indefinitely.
So, we are starting to get some traffic to this beauty from our existing sites and the counters we implemented but, how can we get some more traffic for FREE?
What I suggest we do next to this little baby is to add a banner exchange code to EACH of the FPA’s we have and also, onto the larger table console we created.
You should sign up for one banner exchange code for this trap, you might like to search around for a banner exchange that lets you have a decent ratio of impressions.
Once you have signed up for your banner exchange code, you now need to copy this coding into the BOTTOM of all of your FPA HTML pages including the Multi-Site FPA.
Now you have the banner exchange code on your site you are earning credits. Your account may not be activated for a day or so but, what this means is you are earning credits the entire time you are showing banners on your Surfer Trap.
Now we have the banner exchange code on our sites we only have one further step to take in order for this project to be completed.
Making sure it works how it is supposed too along with fine tuning this little beast.
If you have any further questions or comments please post on the forums here and one of us will be able to help you.
Article written by Lee.
-
Building A Surfer Trap – Stage 6
Stage 6 already!
Only 2 more stages to go after this tutorial until you have a fully functional surfer trap!
Ok as promised in the last tutorial, we are going to implement the table pages you hopefully made in our last tutorial.
You now need to signup for ANOTHER counter code. Use the same counter as you did last time and, again, make sure the URL you send the traffic from the counter to is your main Multi-Site FPA surfer trap page.
Ok, you have the new counter code, what you should do with this is place it on every one of the niche table pages we made yesterday. Nowhere else except on these pages.
Once you have the counter code placed you now need to go back to our consoles, what we are going to do is make these HTML table pages into a secondary console from off the first pop up that we get when a surfer visits any of our FPA’s.
What you should do is enter the following coding in between the <head> and </head> tags of the niche pop-ups ensuring that you choose a DIFFERENT niche to the one of your original consoles:
<!—— BEGIN CONSOLE CODE ——->
<SCRIPT language=Javascript>
<!–
var exit=true;
function exitcnsl()
{
if (exit)
open(“http://www.yourdomain.com/tableconsolepage.html”, “tables”,”toolbar=0,location=0,status=0,menubar=0, scrollbars=0,resizable=0, width=800,height=600,top=0,left=0″);
}
//–>
</SCRIPT>
<!—— END CONSOLE CODE ——->You need to edit the figures for width= and height= to reflect the size of your table, ideally the frame of the console should be around 3 or 4 pixels either side of your tables.
Ok now once you have added the above to your existing pop-ups you now need to add the following to the newly created table consoles between the <head> and the </head> tags:
<SCRIPT language=javascript>
self.blur();
</script>What this will do is once the first console loads, it will immediately load a second console but, this second console should be ‘hidden’ behind the main window that is displayed. We have created a blur console.
We now have one last thing to do with this ‘blur console’ that we have just created.
Go to the HTML coding for the table ad console and add the same JavaScript to that page however, this time you DO NOT need to use the self.blur section of the instructions or, change the sizes of the console that pops.
Instead you need to add the following to the <body> tag:
onUnload=”exitcnsl()” so as an example your body tag may look like this:
<BODY BGCOLOR=#000000 onUnload=”exitcnsl()”>
Now you also need to alter the location for the console that will pop this time, you have a choice, you can send the console directly to the ARS POTD program or, you can send it BACK to your Multi-Site FPA page, at which point the surfer will be able to select another niche or leave your site.
Now remember, this surfer trap IS aggressive however, every time one of your counter codes load both from the FPA’s where we implemented them AND on the newly created table consoles we are gaining extra traffic.
If you have ANY questions at all please do not hesitate to post on the forums and myself or one of our administrators will assist you.
Article written by Lee
-
Building A Surfer Trap – Stage 5
So we hit stage 5 in this surfer trap tutorial.
It was brought to my attention this morning that we never added any ALT tags to our single FPA link so, in a change to the planned tutorial I am going to touch on this stage as, once the search engines get to our surfer traps this is going to be a crucial aspect on how highly we get ranked.
So what’s next?
Ok, now what you have to do is go back to manually editing the FPA’s (All of them!)
What you need to do is this…
Take the Multi-Site FPA first then, on ALL of the links that lead to the single site FPA’s you need to add the ALT tag. Again, in the same way as we did originally however, instead of using this tag on the images we will use this on the actual TEXT of the link so, for example the link which may be:
‘Voyeur Porn’ leading to the FPA you have for the Voyeur niche in the HTML coding will already look like this:
<a href=”mydomain.com”>Voyeur Porn</a>
Will get turned into:
<a href=”mydomain.com” ALT=”More Niche Related Keywords”>Voyeur Porn</a>
The reason we are going back over these links now and not earlier on is because you should hopefully have started to get a small amount of traffic from your counter impressions. These counters are virtually ALWAYS being crawled by the search engines due to the amount of people linking to them so, by optimizing our site at this stage, it makes it less work in getting into the search engines.
One other thing that we can now start to do (as we did a couple of stages back) is to create some more HTML pages with some tables on them, however, these will be HTML pages on their own with no images on them. Again however, you should make them 4 columns across and two rows high.
What you want to add into these tables are NICHE links so for example, taking the TEEN niche we would make eight links like:
Teen Sex
College Girls
Erotic Teens
Teen Porn
Etc
Etc
Etc
Etc…You should do this for each of the MAIN niches so you would have a table for Teen, Gay, Mature, Asian, Ebony, Fetish and one for General and again, these should link to the NICHE FPA’s that you already have created.
These tables will be used for another console on our surfer trap however, before we implement this console we are going to have some fun with them.
Article written by Lee
-
Building A Surfer Trap – Stage 4
Building A Surfer Trap – Stage 4.
Here we go with stage 4 in our surfer trap.
We should now have a pretty basic surfer trap set up with consoles on all of the FPA’s all of the links on all of the FPA’s (Excluding the FPA graphics) should go to either another FPA or, the a POTD Program.
As mentioned in the last stage we are going to start building up some traffic to our surfer trap even though, we are not finished yet.
The first place where you can get some good free traffic would be from a toplist counter.
A good counter that I would recommend would be one of the following:
Outster http://www.outster.com (A Gay Specific Counter)
SexTracker http://www.sextracker.com (A General Adult Counter)You need to sign up to ONE of the above counters and only ONE.
Usually a counter will ask you for some details when signing up for them these will usually include:
Email Address.
Site Url
NameFor the email address, enter a REAL email.
For Your Name, Enter a name you wish to be known by to the counter owners.However, for the URL (The one to SEND traffic to FROM the counter) you should enter the index.html page of your surfer trap (The Multi-Site FPA).
You will now be given some coding once you complete the counter sign up process. This counter code you now need to place on EVERY page of your surfer trap.
Place the counter towards the bottom of your FPA’s (Including the Multi-Site FPA) this way, they will load after the rest of the graphics or at least, they should in theory.
Basically what you are doing by implementing this counter is as follows:
For each time the counter is displayed or clicked on your site (Depending on the counter you choose) you will earn one credit on the respective counters toplist.
Each credit you earn on the toplist will move you higher up the list.
Now, the higher up the list you get, the more visitors to the counter site that you are going to get visiting your surfer trap by clicking your link on the toplist.
In return, by clicking on your surfer trap link from the toplist, they are ‘registering’ another impression of your counter hence, getting you one more ‘credit’ on the counter toplist hence, moving you higher in the listings.
See where we are going with this?
The more clicks you get from the counter to your hub, the higher you will get on the toplist in the process earning you more and more traffic to filter through your surfer trap.
Adding these counter codes to your FPA’s as they stand at present should take you an hour or so to do so, for now this is where I will leave the traffic generation section of this tutorial.
Article written by Lee
-
Building A Surfer Trap – Stage 3
Building A Surfer Trap – Stage 3.
You should hopefully by now have a basic looking surfer trap ready on your server and on your hard drive.
Now we need to start to ‘dirty’ this surfer trap up a little.
We have already added 1 pop-up console to each of the FPA’s including the Multi-Site FPA.
For the next step in this ‘dirtying’ process we need to add some additional links onto each of the FPA’s including the Multi-Site FPA.
On the FPA’s what you need to do is create a ‘no thank you’ link so, if your surfer does not want to visit the site for the FPA you have sent them to you can send them to an alternative.
This no thank you link can go to one of two places, you need to decide where you feel the traffic can be best utilized however, from my experience i would highly recommend using this first method:
Link the ‘no thank you’ text on each of the single site FPA’s to another DIFFERENT niche FPA in your surfer trap so, as an example, if your surfer is on the All Petite FPA in your trap, the ‘no thank you’ link would lead to Just Toon’s. If they decide not to go with the Just Toon’s site, the ‘no thank you’ link on this FPA would go to Gay Ultra and so on, you need to ensure however, that the ‘no thank you’ link goes to a completely different niche to the one of the FPA the surfer is currently on.
The second option you have is to link the ‘no thank you’ text to the ARS POTD (picture of the day) program. This will be your last chance at selling the surfer to one of the ARS pay sites.
In addition to the ‘no thank you’ link on each of the FPA’s you also need to add a small table to the Single-Site FPA’s. ideally this should be four columns across and 2 rows down. This will give you 8 places to put a one or two word link going to another different niche FPA than the one the surfer is currently viewing however, you also need to ensure that these 8 links are going to a different FPA than the ‘no thank you’ link you have created.
The above stage is where we could potentially start to lose people in the instructions therefore if you have ANY questions or queries regardless of how small they may be please post on the forums.
This stage should hopefully only take you a couple of hours to complete and, once you have tested all of the links and uploaded the FPA’s to your server you are all set for the next MAJOR step in this project…. Generating Fresh Traffic.
Article written by Lee
-
Building A Surfer Trap – Stage 2
In the last tutorial we hopefully got the foundations of our surfer trap laid and in this stage, we will start to put this thing together.
Ok the first step of stage two of building your surfer trap is to start linking each of the individual FPA’s to your Multi-Site FPA.
The easiest way that I have found to do this is to give each FPA its own sub directory on your server and have the html page named index for each of the single site FPA’s.
So for instance, if you have the site All Petite on your Multi-Site FPA you would link it to:
mydomain.com/all-petite/
Or whatever you called the sub directory for the All Petite single FPA.
Now, once you have linked these single FPA’s to your Multi-Site FPA we need to start ‘playing’ with them once again.
You should now have copy’s of your single site FPA’s and Multi-Site FPA on both your server and Hard Drive.
Take the copy’s you have on your hard drive and add a small NICHE pop up console to each of the single site FPA’s AND the Multi-Site FPA.
I would suggest making 6 NICHE consoles.
These consoles should be pure text and nothing else.
Each of the links on this small console should link to a different niche of your single site FPA’s I usually go with one link for each of the following niches…
Gay
Mature
Teen
Fetish
Hardcore
AsianPlus, I usually add a link at the bottom of my console which goes to the POTD program.
Once you have these consoles built you should upload them to their OWN sub directory on your server, I would suggest calling this directory ‘consoles’ and calling each of the niche consoles the name of the NICHE they represent.
So, you should now have the following on your HD and on your server:
1 Multi-Site FPA
50 or so Single Site FPA’s (All Linked From The Multi-Site FPA)
6 Small Pop-Up Consoles (Popping Only One On The Multi-Site FPA and The Single Site FPA’s, each different niche Single Site FPA pops a different niche console however.)You now have to check that your surfer trap is working so far.
Article written by Lee.
Premium Sponsors
Categories
- 2257
- Billing Solutions
- Blogging
- Branding
- Content
- Domain Names
- Employment
- Forms & Contracts
- General
- Hosting
- Link Lists
- Opt-in Mail
- Paid Traffic
- Pic Posts
- Promotion
- Scripts
- Search Engine Optimization
- Sponsors
- TGP
- Traffic
- Tutorials
- Viral Marketing
- WebDesign
- Writing